2022 Jeep Gladiator Bolt Pattern Guide By Years
The bolt pattern for a 2022 Jeep Gladiator is 5x127 (or 5x5 ), indicating that each wheel has five bolts (or lugs) that are arranged circularly with a 127 mm (5 inches) diameter.
One of the simplest yet cool 2022 Jeep Gladiator mods is to replace stock wheels with bigger aftermarket options.
However, before you switch, you must know your 2022 Jeep Gladiator lug pattern to confirm compatibility with the new set of wheels. But even if the current bolt pattern of your 2022 Jeep Gladiator and the new wheels do not match, consider converting to the required scheme using the wheel adapters.
Also, new rims must sit within the wheel offset range, and the 2022 Jeep Gladiator's stud must fit onto the hub bore. Use the measurements below while searching for new wheels.
A bolt pattern, or lug pattern, is a two-number system used to measure the imaginary circle (PCD) formed by the lug holes at the center of a wheel. The first number counts the holes in the wheel, while the second number indicates the pitch circle diameter in mm or inches.
A machined opening in the center of the wheel. It must be "Hub Centric" to reduce vibration.
The outer diameter of your wheel stud threads in either metric (M12, M14, etc.) or standard units (1/2", 9/16", etc.).
Dimensions of the stock tires, including its width, aspect ratio (sidewall), and diameter.
P 275/55 R20
Wheel Adapters - See more
6x139.7 to 6x135 (6x5.5 in to 6x5.3 in)
EOTH Wheel Adapters
-
Benefit
-
Solve wheel fitment issues especially when change bolt pattern
-
Allow you to use bigger tires
-
Customize the offset of your rims
-
Give you the custom aggressive look
Ryin 6x5.5 to 6x135 Adapters
-
Usage:
-
Change Bolt Pattern to Use 6x135 Wheels on 6x139.7 Trucks.
-
Give you the custom aggressive look
DCVAMOUS
-
Benefits:
- Adapted on a new rim, give your vehicle that aggressive stance, eliminate rubbing, mount a larger wheel or tire, clear breaks or struts. They also increase your vehicles handling performance due to adding trek and width to your stance.
6x139.7 to 6x114.3 (6x5.5 in to 6x4.5 in)
EZAccessory Wheel Adapters 6x5.5 to 6x4.5 1.5"
- Fit vehicles of 6x5.5" or 6x139.7mm bolt pattern. Your Garage filter is to confirm fitting of your vehicle only, not for the wheels. Convert to wheel must be 6x4.5" or 6x114.3mm bolt pattern.
EZAccessory Wheel Adapters 1.5"
- Quality Assurance: Aircraft quality TRUE forged 6061 T6 lightweight billet. CNC machined with precision craftsmanship. Features in high load capacity and keep stock ride. Anodized for corrosion resistance. Heat-treated 10.9 grade steel studs with mounting lug nuts included.
6x139.7 to 5x114.3 (6x5.5 in to 5x4.5 in)
EZAccessory 2 Wheel Adapter 6x5.5 to 5x4.5
- Convert from 6 lug vehicle to 5 lug wheel, meaning putting 5 lug wheels on 6 lug vehicle. Aircraft quality TRUE forged 6061 T6 lightweight billet. CNC machined with precision craftsmanship. Features in high load capacity and keep stock ride. Anodized for corrosion resistance. Heat-treated 10.9 grade steel studs with mounting lug nuts included.
- Attention - 1/2" studs; 2" (50mm) thickness; 108mm center bore; Adapters will give you widened stance as well as more stability. If vehicle studs protrude outside the inner piece adapter, you will need to shave down vehicle studs.
6x139.7 to 5x139.7 (6x5.5 in to 5x5.5 in)
EZAccessory Wheel Adapters. 2 Inch thickness
-
Installation Notes:
-
-
- Unscrew and separate the two adapter pieces first.
-
- Install the inner adapter piece using short open end lug nuts with no more than 13/16" hex.
-
- If hub studs protrude outside the inner adapter piece and prevent the outer adapter piece from sitting flush, it is required to shorten the factory studs.
-
- Bolt outer adapter piece to the inner piece using provided black allen bolts.
-
- Install your wheels to the studs of the outer adapter piece using proper lug nuts that both match the thread size of the adapter studs and the seating style of your wheels.
6x139.7 to 8x165.1 (6x5.5 in to 8x6.5 in)
EZAccessory Wheel Adapter 6x5.5 to 8x6.5
-
Installation Notes:
-
-
- Unscrew and separate the two adapter pieces first.
-
- Install the inner adapter piece using short open end lug nuts with no more than 13/16" hex.
-
- If hub studs protrude outside the inner adapter piece and prevent the outer adapter piece from sitting flush, it is required to shorten the factory studs.
-
- Bolt outer adapter piece to the inner piece using provided black allen bolts.
-
- Install your wheels to the studs of the outer adapter piece using proper lug nuts that both match the thread size of the adapter studs and the seating style of your wheels.
6x139.7 to 5x127 (6x5.5 in to 5x5 in)
EZAccessory 2 Wheel Adapter 6x5.5 to 5x5. Thickness 2 inch
-
Installation Notes:
-
-
- Unscrew and separate the two adapter pieces first.
-
- Install the inner adapter piece using short open end lug nuts with no more than 13/16" hex.
-
- If hub studs protrude outside the inner adapter piece and prevent the outer adapter piece from sitting flush, it is required to shorten the factory studs.
-
- Bolt outer adapter piece to the inner piece using provided black allen bolts.
-
- Install your wheels to the studs of the outer adapter piece using proper lug nuts that both match the thread size of the adapter studs and the seating style of your wheels.
6x139.7 to 8x180 (6x5.5 in to 8x7.1 in)
EZAccessory 2 Wheel Adapter 6x5.5 to 8x180. Thickness 2 inch
-
These two-piece conversion-type wheel adapters are used to convert 6-lug vehicles with 5.5" (139.7mm) bolt patterns to fit wheels with 8x180 bolt patterns. Mostly used for 6-lug Chevy Tahoe, Suburban, etc to install 8-lug Ford wheels. They will also space out your wheels for 2-inch to help you get enough clearance for wider tires and rims. CNC machined with precision craftsmanship using 6061 T6 aerospace quality billet, featured in high load capacity and corrosion resistance. High-quality studs are pre-installed.
-
Adapter Specification:
- Vehicle Bolt Pattern: 6x5.5" (139.7mm)
- Wheel Bolt Pattern: 8x180mm
- Studs Thread Size: 14x1.5
- Hub Bore Size: 108mm
- Thickness: 2-inch (50mm)
- Lug Torque: 95 ft-lbs
- Black Allen Bolt Torque: 55 ft-lbs
6x139.7 to 6x120 (6x5.5 in to 6x4.72 in)
EZAccessory 1.25" Wheel Adapters
-
Vehicle Side Fitments:
-
-
- Fits Chevrolet: C/K 1500 2/4WD (1999-2001), Silverado 2/4WD (1999-on), Sierra 2/4WD (1999-on), Avalanche (2001-on), Tahoe, Yukon (1995-on), Blazer-Full Size 4WD (1992-1994), Suburban (1992-on), Colorado (2004-on)
-
- Fits GMC: G.M. - K1500 4WD (1988-on), GMC - Denali (1998-on)
-
- Fits Toyota: Tacoma 4WD (1995-on), Sequoia 4WD (2001-on), Tundra (1999-2006), 4-Runner (1986-on), T100 (1993-1998), Land cruiser (1962-1992)
-
- Fits Mazda: Pickup, B2000, B2200 (1977-1996)
6x139.7 to 8x170 (6x5.5 in to 8x6.7 in)
Wheel Adapters 6x5.5 to 8x170
- These two piece conversion type wheel adapters are used to convert 6 lug 5.5-inch (139.7mm) bolt pattern hub to fit wheels of 8 lug 170mm bolt pattern. Adapters are built with 125mm hub centric lip to support F250 or F350 Super Duty wheels for a factory fit. They will space out your wheels for 2-inch. Significantly reduces stress on bearings and chance of vibrations. Check to make sure you have enough clearance. CNC machined with precision craftsmanship using 6061 T6 aerospace quality billet, featured in high load capacity and corrosion resistance. High quality studs are pre-installed.
Centric rings - See more
Install Aftermarket Wheels
Lug nuts - See more
Keep tires attached to the hub
- Improved design - this replacement lug nut changes the original two-piece design to one piece for greater reliability
- Thoroughly tested - part has undergone proof load, s...
Check price on
Includes 20 Chrome M14 x 1.50 Duplex Spline Lug Nuts, 1 Socket Key
Specifications: M14 x 1.50 Thread Pitch, 2” Overall Height, 0.92” Diameter, 60-Degree Conical Seat, anti-theft s...
Check price on
Specifications:
- M14x1.50 Thread pitch,
- 4.4” Overall height,
- 0.92” Diameter,
- 60-degree Conical Seat,
- Bulge Acorn design, anti-...
Check price on
Specifications: M14x1.50 Thread pitch, 4.4” Overall height, 0.92” Diameter, 60-degree Conical Seat, Bulge Acorn design, anti-theft spline design. Chrome Finish. For 8-lug vehicles.
<... Check price on